TANDBERG TT1260 Reference Manual page 126

Technical Specification
16
B.12.2 EMC
This equipment has been designed and tested to meet the following:
EN 55022
and
CISPR22
EN 61000-3-2
EN 61000-3-3
EN 55024:1998
FCC
B.12.3 CE Marking
The CE mark is affixed to indicate compliance with the following
directives:
89/336/EEC of 3 May 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
73/23/EEC of 19 February 1973 on the harmonisation of the laws of the
Member States relating to electrical equipment designed for use within
certain voltage limits.
1999/5/EC of 9 March 1999 on radio equipment and telecommunications
terminal equipment and the mutual recognition of their conformity. (If
fitted with telecom type interface modules).
NOTE...
The CE mark was first affixed to this product in 2002.
16
The EMC tests were performed with the Technical earth attached, and configured using recommended cables.
17
Applies only to models of the Product using ac power sources.
Page B-28
European
International
17
European
17
European
European
USA
Emission Standard
Limits and methods of measurement of
radio frequency interference
characteristics of information
technology equipment - Class A.
Electromagnetic Compatibility (EMC),
Part 3 Limits; Section 2. Limits for
harmonic current emissions (equipment
input current £ 16 A per phase).
Electromagnetic Compatibility (EMC),
Part 3. Limits; Section 3. Limitation of
voltage fluctuations and flicker in low
voltage supply systems for equipment
with rated current £ 16 A.
Information technology equipment -
Immunity characteristics - Limits and
methods of measurement.
Conducted and radiated emission limits
for a Class A digital device, pursuant to
the Code of Federal Regulations (CFR)
Title 47-Telecommunications, Part 15:
Radio frequency devices, subpart B -
Unintentional Radiators.
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.1