TANDBERG TT1260 Reference Manual page 123

B.9 Environmental
B.9.1 Conditions
Table B.40: Environmental Conditions
Operational
Temperature
Humidity
Cooling requirements
Handling/movement
Storage/Transportation
Temperature
Humidity
B.9.2 Physical
Table B.41: Physical Parameters
Parameter
Height
Width
Depth
Rack mounting standard
Weight
B.10 Power Supply
B.10.1 AC Mains Input
This equipment is fitted with a wide-ranging power supply. It is suitable for
supply voltages of 100-120 Vac -10% +6% or 220-240 Vac -10% +6% at
50/60 Hz nominal.
Table B.42: AC Power Supply Specification
Item
Power distribution system
Connection to supply
Class of equipment
Rated voltage
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.1
Specification
0°C to +50°C ambient air temperature with free airflow
0% to 95% (non-condensing)
Convection cooling/free airflow
Fixed (non-mobile) use only
-20°C to +70°C (-4°F to +158°F)
0% to 95% (non-condensing)
Specification
44.3 mm
442 mm (without rack fixing brackets)
482 mm (with rack fixing brackets)
350 mm (including connectors)
1U x 19-inch (1U º 44.45 mm)
Weight 4.5 - 5.0 kg depending on configuration
Specification
Type TN ONLY (EN 60950 para 1.2.12.1): Power distribution system having one point
directly earthed, the exposed conductive parts of the installation being connected to
that point by protective earth conductors. This equipment must NOT be used with
single-phase three-wire and PE, TT or IT Type Power distribution systems.
Pluggable Equipment Type A (EN 60950 para 1.2.5): Equipment which is intended for
connection to the building power supply wiring via a non-industrial plug and
socket-outlet or a non-industrial appliance Coupler or both. Correct mains polarity
must always be observed. Do not use reversible plugs with this equipment.
Class I Equipment (EN 60950 para 1.2.4): electric shock protection by basic
insulation and protective earth.
100-120/220-240 Vac (single phase)
Technical Specification
Page B-25