Fowarding Received Faxes To An E-Mail Destination - Sharp UX-4000M - UX 4000 B/W Laser Printer Service Manual

Fowarding received faxes to an E-mail destination

If desired you can have all incoming faxes automatically forwarded to a specified E-
mail address. To use this feature, you must first program the E-mail address (only
one) into a Rapid Key or Speed Dial number. (See Programming Rapid Key and
Speed Dial Numbers on page 5-1.)
To turn on this feature, select Fax Settings from the Fax menu and then select the
Fax Modem Setup tab.
In the Incoming Faxes field, select "Forward Incoming Faxes". In the "Use:" drop-down
list, select the Rapid Key or Speed Dial number in which you programmed the E-mail
address. When finished, click the OK button.
Note that the Forward Incoming Faxes feature overrides the RECEIVE UNIT and
reception mode settings on the Laser Multifunction unit, and thus it isn't necessary
to change these settings when you turn on the Forward Incoming Faxes feature.
When the feature is turned on, E-MAIL TRANSFER will appear in the unit's display.
PC FAXING 6-11