Setup for Auto Dial E-mail
Before you can program an E-mail address in a Rapid Key or Speed Dial number, you
must enter the name of your outgoing mail server (SMTP server) in the Control
Panel. Open the Control Panel and select the Miscellaneous tab.
In the Default E-mail Setup field, enter your outgoing mail server name under SMTP
Server. (Your Internet service provider provided you with this information when you
initiated service. If you no longer have the information, contact your provider.) If your
provider also requires a local host, enter the local host name under Local Host.
When finished, click the OK button or the Apply button to save your settings. If you
click the OK button, the Control Panel will close. If you click the Apply button, the
Control Panel will remain open.
5-2
USING THE LASER MULTIFUNCTION CONTROL PANEL