Control Printing Menu - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Chapter 5: DOS Printing
Control Printing (pause, reset, eject)
This menu lets you pause or continue printing,
reset the printer, or eject a page. (Pause and Reset
are only available for SuperScript 870 printers
connected directly to your computer.)
Change Printer Settings
This menu lets you change a number of internal
SuperScript 870 printer settings.
Change LaserJet IIP Emulation
Settings
This menu lets you select a number of settings
that are used when you print from DOS using
LaserJet IIP emulation mode. This mode is
automatically used whenever you print from DOS
software, do a printscreen, or copy a text file to
the printer.
74
Print Sample Pages
This menu lets you print two sample pages, one
showing your printer's internal settings and the
other showing your printer's internal fonts.
Change Status Monitor Settings
This menu lets you change the Hot key used by
the DOS Status Monitor, and choose whether you
want the DOS Status Monitor to provide audible
warnings of printer problems.
Change Printer Port
If you have multiple printers connected to your
computer, you can use this menu to specify which
printer port your NEC SuperScript printer is
connected to.
Exit to DOS
This menu option exits the SuperScript 870 Printer
Control Panel and returns you to the DOS prompt.
Each menu is described below.

Control Printing Menu

The features on this menu are similar to those
available in the memory-resident DOS Status
Monitor program. These allow you to monitor
your printer's status and to send several printer
control commands.