NEC 870 - SuperScript B/W Laser Printer Online User's Manual page 57

Consult with your network administrator before
changing the settings in this box. The new settings
will take effect as soon as you press O.K.
Timeout Settings
Auto-continue—This setting determines how the
printer responds if it senses a complexity or
memory overflow error. Options are:
Enabled: a printer message appears on the status
monitor, but printing continues. If the error was
due to complexity or memory overflow after the
problem page has been ejected from the printer,
the remainder of the document may be printed
depending on the error that occurred. This is the
default setting for the SuperScript 870 printer.
Chapter 3: Installing the Software
Disabled: A printer message appears on the
Operator panel and Windows Status Monitor.
Printing stops until you correct the problem.
Note: When a SuperScript 870 is
connected to a network, Auto-continue
should be enabled in order to prevent jobs
from backing-up in the print queue.
Jam recovery—Jam recovery is a feature that
allows the printer to reprint a page after it has
jammed. Jam recovery can be set to On or Off (the
default). When it is set to On, the printer will
automatically attempt to reprint the lost page after
a jam is cleared.
The SuperScript 870 will always reprint any page
incompletely imaged due to a paper jam. Turning
Jam recovery on will set aside memory so that the
printer may also be able to recover jammed pages
which have completed imaging.
Note: Jam recovery will not function if
you turn off the printer power before
clearing the paper jam.
57