Change Laserjet Iip Emulation Settings - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

print onto pre-printed forms. Setting a negative
value moves the printing position to the left. A
positive value moves the printing to the right. You
can set a value from -127 to +127. The default
setting is 0 (zero). Each increment is equal to one
three-hundredth of an inch.
Vertical Offset
The vertical offset setting allows you to shift the
printing on the page up or down. For example, if
you need to print onto pre-printed forms. Setting
a negative value moves the printing position up
on the page. A positive value moves the printing
down. You can set a value from -127 to +127. The
default setting is 0 (zero). Each increment is equal
to one three-hundredth of an inch.
Save settings, Return to Main Menu
Select this option when you have the settings on
this menu set as you want. The current settings
will be sent to the printer and you will return to
the Main Menu.
If you do not want to store the current settings,
you can press ^ to return to the Main Menu
without saving your settings. You can also press
p to restore all settings to their default values.
Chapter 5: DOS Printing

Change LaserJet IIP Emulation Settings

This menu lets you specify a number of settings
that affect your print jobs when you print from
DOS, including doing print screens, copying text
files to the printer, or printing from a DOS
program that does not have a LaserJet IIP printer
driver.
Note that if you print from a DOS program that
does have a LaserJet IIP printer driver, such as a
DOS word processor, the program's printer driver
usually overrides any settings on this menu. Be
sure to select LaserJet IIP as your installed printer
if your DOS program gives you a choice. Before
these settings can take effect, you must turn the
printer off and then on again.
77