Dos Printer Control Panel; Main Menu - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

manually copy the software from theSuperScript
870 Solutions CD to your hard drive:
1. From the DOS prompt, create a directory on
your hard drive for the DOS software
(for example: \necdos):
Type md c:\necdos and press
2. Change to the directory you have just created:
Type cd c:\necdos and press
3. Copy the SuperScript 870 DOS program files
n870cp.exe, n870cp.hlp and
n870sm.exe from the "SuperScript 870
Solutions CD" (if it is loaded in drive D):
Type copy d:\ss870\dos\n870cp.exe
and press
e
Type copy d:\ss870\dos\n870cp.hlp
and press
e
Type copy d:\ss870\dos\n870sm.exe
and press
e

DOS Printer Control Panel

The Printer Control Panel is a DOS program that
lets you change a number of printer settings, print
sample pages, and change the settings of the DOS
Status Monitor.
To run the Printer Control Panel if you installed
the NEC SuperScript 870 software through
Windows:
From the DOS prompt, type n870cp and press
e
e
To run the Printer Control Panel if you installed
the NEC SuperScript 870 software through DOS:
e
1. Go to your NEC DOS directory and type:
cd \necdos and press
2. Then type: n870cp and press
The Printer Control Panel will run and you will be
at the Main Menu, described in the next section.

Main Menu

The Main Menu, which appears when you run the
Printer Control Panel, is used to access sub-menus
where you make changes to printer settings and
choose other options.
To select menu options from the Main Menu
highlight up and down with the keyboard arrow
keys and press
Chapter 5: DOS Printing
.
e .
e .
e .
73