Installing The Superscript Software - NEC SuperScript 610 User Manual

INSTALLING
THE
SUPERSCRIPT
SOFTWARE
SuperScript Software Installation
The SuperScript software installation program
analyzes your system configuration, installs the
SuperScript software and fonts, and makes the
necessary changes to the Windows startup files. As
shown in the following tables, there are two ways to
install SuperScript software:
•
Installation via diskettes or CD
•
Initial installation via diskette #1 then across the
network from a SuperScript Server
Installation can be performed either from installation
diskettes (or CD) or from across the Windows
network. Once the SuperScript software has been
installed on the Server PC, Client software can be
installed on the Client PCs from across the network.
If CD drive is not available, network installation
proceeds faster than diskette installation.
For a Client to perform installation across the
Windows network, the SuperScript Server must
share its Windows folder and the NECSSFW folder
containing the file NETSETUP.EXE.
NOTE: If you need to make SuperScript for
Windows95 installation diskettes, you can do it from
SuperScript for Windows95 installation CD as
follows. (You need seven diskettes. The following
instruction assumes CD drive is drive D and diskette
drive is A.)
At the DOS prompt, type:
(1) d:
(2) cd \software\win95\makedisk
(3) makefd a:
Then you can follow the instructions on your screen
to make the installation diskettes.
3–5