Table of Contents
Advertisement
LAN Phone 101 User Manual Guide
2. -send: three voice packet size can be configured as 20 ms, 40 ms or 60 ms.(only 30 and 60
ms for G..723)
3. -priority: set codecs priority in order. Please notice that user can set from 1 to 5 codecs as
their need, for example, voice –priority g723 or voice –priority g723 711a g711u g729a
g729 means LAN Phone can support only one codec or five codecs.
4. -volume: There are three types can be adjustable, voice volume, input gain and DTMF
volume.
5. -nscng: enable or disable sound compression and comfort noise generation. It is only for
codec G.723.1. (0 for off ,1 for on)
6. -echo: echo canceller can be made to each specified port. The default value is on to 6 ports.
7.-mindelay:set minimum delay of jitter buffer(0~150)
8.-maxdealy:set maximum delay of jitter buffer(0~150)
Note: It is for advanced administrator use only. Please ask your distributor before
changing any settings of this command.
14. [tos] command
This command is for setting IP packet TOS values to determine IP Packets priority on network.
1. -print : display current TOS values configurations.
2. -rtptype : configure TOS type of RTP packets from 0 to 7
Copyright (c) 2002 WellTech Computer Corporation
29
LAN Phone Ver. 113/503(Normal and PPPoE)
Document Ver. 1.8
Advertisement
Table of Contents
