Commit] Command; Ifaddr] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 113 & 503 Manual

LAN Phone 101 User Manual Guide

5. [commit] command

Save any changes after configuring the LAN Phone 101.

6. [ifaddr] command

Configure and display the LAN Phone 101 IP information.
1. -ip, -mask, -gate: Set LAN Phone 101 IP Address, subnet mask and default gateway
respectively.
2. -dhcp: When DHCP function enables (ifaddr –dhcp 1), LAN Phone 101 will automatically
search DHCP server after execute the commit and reboot command.
Note: After LAN Phone catch a dynamic IP address form DHCP server, user can see this IP
address on LCD connect configuration.
3. -sntp: When sntp server is available, enable LAN Phone 101 SNTP function and point to
sntp server IP address. (ifaddr –sntp 1 "xxx.xxx.xxx.xxx")
4. -dns:User can set Domain Name Server IP address. Once LAN Phone can connect with
DNS server, user can specify URL address instead of IP address for gatekeeper and phone
book IP address. (please refer to 12.[h323] command and 3.9[pbook] command)
5. –timezone: User can set different time zone according to the location LAN Phone is. For
example, in Taiwan the time zone should be set as 8,which means GMT+8. (GMT-8:
ifaddr –timezone -8)
6. -ipsharing: If LAN Phone 101 is behind a IP-sharing , user can enable IP sharing function
and specify public IP address.(ifaddr –ipsharing 0/1 "public IP address of IP sharing" , 0
for disable and 1 for enable)
7. -cmcenter: Set management center IP address. IF user specifies management center IP
address, LAN Phone will send information to management center, let user can easily
configure via management center interface. (ifaddr –cmcenter "IP address of
management center" ; ifaddr –cmcenter x to disable this function)
Copyright (c) 2002 WellTech Computer Corporation
21
LAN Phone Ver. 113/503(Normal and PPPoE)
Document Ver. 1.8