1. Manuals
  2. Brands
  3. WELLTECH Manuals
  4. Telephone
  5. LAN PHONE 101 H.323 - VERSION 114 & 504
  6. Manual

WELLTECH LAN PHONE 101 H.323 - VERSION 114 & 504 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LAN PHONE 101 H.323 - VERSION 114 & 504 and is the answer not in the manual?

Questions and answers

Related Manuals for WELLTECH LAN PHONE 101 H.323 - VERSION 114 & 504

Summary of Contents for WELLTECH LAN PHONE 101 H.323 - VERSION 114 & 504

  • Page 2 Notice © Copyright 2003 Welltech Computer Co., Ltd. All intellectual property rights in this publication are owned by Welltech Computer Co., Ltd. and are protected by Republic of China copyright laws, other applicable copyright laws and international treaty provisions. Welltech Computer Co., Ltd. retains all rights not expressly granted.

  • Page 3: Table Of Contents

    Step 2. Input the login name and password................39 Step 3. The web interface main screen..................39 Step 4. Start configure........................40 1.Network Interface ......................40 2. H323 Information......................42 3. System Configure......................44 Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 4 LAN Phone 101 User Manual Guide Document Ver. 1.8b 4. PPPoE Configure ......................45 Chapter 5 Upgrade the LAN Phone 101 ..................57 ＊Download Procedure......................57 1.LCD Panel Control......................57 2.Remote Control: Telnet ....................58 3.Web Management......................59 Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 5: Chapter 1 Introduction

    Document Ver. 1.8b Chapter 1 Introduction The Welltech LAN Phone 101 is a full-featured IP-based telephone system, which provides VoIP service on LAN or any IP based environment. By using IP environment for voice communication, company or individual can save lots of expenses and make data and voice network converged.

  • Page 6: Product Description

    10 Direct Line Button for speed dial  Speaker Mode  System Configuration from keypads and displayed on LCD  Ring Tone selection  Password setting for security  Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 7 Audio features: Codec -- G.711 a/μlaw, G.723.1 (6.3Kbps),G.729, G.729a  VAD (Voice Activity Detection), CNG (Comfort Noise Generate)  G.168/165-compliant adaptive echo cancellation  Dynamic Jitter Buffer  Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 8 - Download by Telnet. Management Features: Two easy ways for system configuration  TELNET LAN Phone 101 KEYPAD (can only upgrade application rom file) Web Browser Management Center(only simple configuration) Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 9: Appearance

    Direct Line (DL) Button 1 – 10: User press DL button to do speed dial according to phone book data 1-10 (please refer to LCD configuration-Phone Address Book or Advanced Configurations via Telnet-[pbook] command ). Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 10 MESSAGE and its indicated LED light: When missing the incoming calls, the message LED will be flashing. User can know the information of miss call by pressing the message button. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 11 Note: There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port. When network status is in normal, LED of LINK/ACT will be flashing; when transmit rate is in 10 mbps/100mbps, LED of 10/100 will light off/on . Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 12 1、Ethernet Port： Ethernet port is for connecting LAN Phone to network, transmit rate supports 10/100 Base-T. Ethernet connector（LAN） 2、RJ11connector： RJ11 connector is for connecting LAN Phone with PSTN. RJ11connector Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 13: Chapter 2 Operating Procedure - Lcd Display Configuration

    Press  or  to enter configuration mode then press OK Bottom to enter certain menu. There are 6 selections for configuration. System Configuration (mandatory, protected by password) User Line Number (mandatory) Ring Configuration Indicate Forward Type Message Box Phone Address Book Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 14: Lcd Configuration

    URL address or IP address. Please refer to 3.9 [pbook] and 3.12 [h323] command. (5) Secondary DNS User can set IP address of secondary DNS, once primary DNS cannot work Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 15 User can set LAN Phone in DHCP mode, which means LAN Phone will get a dynamic IP automatically. (11) Token Password (A) LCD menu password: User can enter LCD system configuration by key in Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 16 LAN Phone will connect and send information to management center, let user can easily configure via management center interface. Note: 1.management center is WellTech optional software to help user can easily configure WellTech products, please contact your reseller to know more about it.
  • Page 17 2. User Line Number User has to identify at least one number for the LAN Phone 101 to register to the GateKeeper. User can set up to 10 different numbers. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 18 No response When LAN Phone 101 is continuing ringing around 10 seconds, the incoming call will be directly forwarded to the assigned phone number. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 19 (ex.10.1.1.1 please do not key in 010.001.001.001). 7. PPPoE Information All items below can only be displayed when PPPoE connection is established, user can check related information here. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 20 LAN Phone 101 User Manual Guide Document Ver. 1.8b PPPoE Status Note Information PPPoE IP address Destination Host DNS Primary Subnet Mask Authentication Protocol Device Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 21: Chapter 3 Advanced Configurations Via Telnet

    3.User who changes any configuration needs to do the commit command then reboot command. 1. [help] command Type help or man or ? to display all the command lists. The following figure is shown all commands of LAN Phone 101. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 22: Quit] Command

    Note: To execute the command flash –clean, all configuration of LAN Phone 101 stored on flash rom will be cleaned. It is authorized for the user whose login name is “root” only. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 23: Commit] Command

    LAN Phone will send information to management center, let user can easily configure via management center interface. (ifaddr –cmcenter “IP address of management center” ; ifaddr –cmcenter x to disable this function) Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 24: Time] Command

    LAN Phone 101 User Manual Guide Document Ver. 1.8b Note: management center is optional software to help user can easily configure WellTech products, please contact your reseller to know more about it. 7. [time] command When sntp server is established as well as the sntp function of LAN Phone 101 is enabled, type time command should show the current time what is retrieved from the assigned sntp server.

  • Page 25: Pbook] Command

    Document Ver. 1.8b 9. [pbook] command The command is for Peer-to-Peer Mode use only. Therefore, Welltech VoIP products such as LAN Phone 101 that support Peer-to-Peer Mode are also available to be addressed on the LAN Phone 101 phone book.

  • Page 26: Ddns] Command

    10. –force: to force to execute DDNS update. Once user enter this command , LAN Phone will update DDNS data immediately. (ddns –force “IP address of LAN Phone”) Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 27: Pppoe] Command

    LAN Phone will keep trying to connect. On the other hand, if user disable this function, LAN Phone won’t reboot and keep trying to connect.(pppoe –reboot 0/1) Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 28: Sysconf] Command

    OK will dial out. (sysconf –eod 0/1/2/3 , 0 for no end of dial key , 1 for “OK” button , 2 for “#” button , 3 for “＊” button ) 7.-h450:Enable or disable H.450 related features, which include transfer, hold and forward. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 29: H323] Command

    8. –e164-x:user can assign other 10 telephone numbers .For example, 10 users share the same LAN Phone, they can assign phone numbers as 100, 200, 300….(h323 –e164 100 –e164-1 Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 30 RTP port, and allocated port range. 3.In P2P mode, please dial “#” after press IP address (ex.10.1.1.1 please dial 10*1*1*1#) or e.164 of Phone book (Please refer to chapter 3.9 Pbook Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 31: Voice] Command

    5. -nscng: enable or disable sound compression and comfort noise generation. It is only for codec G.723.1. (0 for off ,1 for on) 6. -echo: echo canceller can be made to each specified port. The default value is on to 6 ports. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 32: Tos] Command

    8. -rtpreliab : configure RTP packets as normal reliability or high reliability 9. -rtcpreliab : configure RTCP packets as normal reliability or high reliability Note: 1. This command won’t be functional until network environment can be capable Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 33: Tone] Command

    0. Furthermore, unit of on/off time is 1/100 second, and suggest to keep level as default value (8).User can also increase the value of level to increase the volume. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 34: Support] Command

    4.-h245fs:set if open H.245 separate channel after fast start or not. (support –h245fs 0/1 , 0 for open and 1 for not.) 18. [bureau] command Type bureau can display commands below. 1. -print: display bureau line information and configuration. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 35: Rom] Command

    MAC address (which you can see on a label attached at the bottom of LAN Phone )with format: (It means to press enter each time after key in two characters.) Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 36 –app –s 192.168.1.1 –f lp.100(If –server is specified , can just type rom –app –f lp.100) Command rom –print can show current version installed in LAN Phone 101. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 37: Passwd] Command

    3. flash –clean: only “root” users can clean all configurations stored in flash. 4. rom –boot :only “root” users can upgrade LAN Phone boot rom version. 5. rom –boot2m : only “root” users can upgrade LAN Phone 2mb firmware. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 38 LAN Phone 101 User Manual Guide Document Ver. 1.8b Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 39: Chapter 4 Web Configuration

    Below provide a simple user guide for user to configure via web interface. Next version for HTTPD web management will not like the command format, but friendly interface. Step 1. Browse the IP Address predefined via RS-232 Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 40: Step 2. Input The Login Name And Password

    Step 2. Input the login name and password  Login name: root / administrator  Password: None (just press Enter in default value) Step 3. The web interface main screen Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 41: Step 4. Start Configure

    If the WAN IP Address of IP Sharing Server router is not a fixed one, it is not necessary to input any values. If behind the dynamic WAN IP Address situation please configure as GK mode and select Welltech Call Manager as proxy server. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 42 LAN Phone 101 User Manual Guide Document Ver. 1.8b Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 43: H323 Information

    Token Password: Set Token password for H.235 security use RTP Port Time to Live (TTL) Gatekeeper finding port RAS Port Response Timeout Connection Timeout: For Advanced User only Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 44 LAN Phone 101 User Manual Guide Document Ver. 1.8b Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 45: System Configure

    Set the DTMF inter digit time (second) Digit Type of End of Dialing: Select end of dialing type as none, OK, #, or * . H.450 Related Features: Enable/Disable H.450 function. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 46: Pppoe Configure

    Set PPPoE Connection User Name Password: Set PPPoE Connection password Reboot After Remote Host Disconnection: Enable/Disable auto reboot after PPPoE disconnection Other items: After PPPoE connection established, related information will be displayed Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 47 Adjust the volume in “Voice” (sending out); “Input” (receiving); “ DTMF” (DTMF sending out) Please Noted the value is limited. Echo Cancel: Enable / Disable (suggested always Enable) Jitter Buffer: Min. Delay and Max. Delay (For Advanced User) Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 48 Please refer to chapter 3.15 [tone] command Busy Tone: Reorder Tone: Ring Tone 1 Ring Tone 2 Dial Tone:. Set the above tone Frequency , Level and On/Off time Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 49 LAN Phone 101 User Manual Guide Document Ver. 1.8b 7. Bureau Setting Please refer to chapter 3.17 [bureau] command Hold Tone Generation(using PCM file): Enable/Disable hold tone generation Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 50 Please refer to chapter 3.16 [support] command Fast Start: Enable to do Fast Start H.245 Tunneling: Enable to open H.245 Tunneling H.245 Separate Channel: Enable/Disable open H.245 channel after fast start connection Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 51 Please Note: The E.164 No. will not be carried together to the destination side. It is said if the destination side is requested to match its E.164 No. (Line No.), user can input any digit he wished. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 52 10. Password Please refer to chapter 3.19 [password] command First select login name as root or administrator, then enter current password , new password and confirm new password again. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 53 FTP Server IP Address: Set FTP server IP address FTP Login: Set FTP login name and password Target File Type: Select which sector of LAN Phone to upgrade Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 54 Press CLEAN will clean all configurations of LAN Phone and reset to factory default value. Please be noted: Once execute this function, user must re-configure all commands all over again. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 55 LAN Phone 101 User Manual Guide Document Ver. 1.8b 13. Commit Data Please refer to chapter 3.5 [commit] command After configuration, user has to commit data then reboot machine. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 56 LAN Phone 101 User Manual Guide Document Ver. 1.8b 14. Reboot System Please refer to chapter 3.3 [reboot] command Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)
  • Page 57 Please refer to chapter 3.18 [rom] command User can see all S/W versions. Note: If there is item can’t be found on web site, please configure them by telnet. Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 58: Chapter 5 Upgrade The Lan Phone 101

    Document Ver. 1.8b Chapter 5 Upgrade the LAN Phone 101 LAN Phone 101 supports two methods to upgrade the new version released from Welltech Computer Co. Both methods are necessary to prepare the TFTP program on the host PC as TFTP server.

  • Page 59: Remote Control: Telnet

    For example: User prepares to upgrade the latest app rom file – wtlp.103c, the TFTP server is 192.168.4.101. rom –app –s 192.168.1.1 –f lp.100 (If –server is specified , can just type rom –app –f lp.100) Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

  • Page 60: Web Management

    FTP Server IP Address: Set FTP server IP address FTP Login: Set FTP login name and password Target File Type: Select which sector of LAN Phone to upgrade Copyright (c) 2003 WellTech Computer Corporation LAN Phone Ver. 114/504(Normal and PPPoE)

This manual is also suitable for:

Lan phone 101

Table of Contents