Tone] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 113 & 503 Manual

LAN Phone 101 User Manual Guide
3. -rtcptype : configure TOS type of RTCP packets from 0 to 7
4. -rtpdelay : configure RTP packets as normal delay or low delay
5. -rtcpdelay : configure RTCP packets as normal delay or low delay
6. -rtpthruput : configure RTP packets as normal throughput or high throughput
7. -rtcpthruput : configure RTCP packets as normal throughput or high throughput
8. -rtpreliab : configure RTP packets as normal reliability or high reliability
9. -rtcpreliab : configure RTCP packets as normal reliability or high reliability
Note: This command won't be functional until network environment can be
capable with TOS function.

15. [tone] command

LAN Phone 101 is configurable of busy tone, reorder tone, ring tone and dial tone. However,
only ring tone and dial tone is functional for now, busy tone and reorder tone are reserved for
future feature.
Usage ： tone –ringtone1/ringtione2/dialtone "low frequency" "high frequency" "low
frequency level" "high frequency level" "low frequency on time" "low frequency off
time" "high on time" "high frequency off time"; user must key in 8 sets of number to finish
this configuration. If it is single-frequency tone, please set high frequency and related items as
0. Furthermore, unit of on/off time is 1/100 second, and suggest to keep level as default value
(8).User can also increase the value of level to increase the volume.
Copyright (c) 2002 WellTech Computer Corporation
30
LAN Phone Ver. 113/503(Normal and PPPoE)
Document Ver. 1.8