Tos] Command - WELLTECH LAN PHONE 101 H.323 - VERSION 114 & 504 Manual

Table of Contents

LAN Phone 101 User Manual Guide

7.-mindelay:set minimum delay of jitter buffer(0~150)

8.-maxdealy:set maximum delay of jitter buffer(0~150)

Note: It is for advanced administrator use only. Please ask your distributor before

changing any settings of this command.

15. [tos] command

This command is for setting IP packet TOS values to determine IP Packets priority on network.

1. -print : display current TOS values configurations.

2. -rtptype : configure TOS type of RTP packets from 0 to 7

3. -rtcptype : configure TOS type of RTCP packets from 0 to 7

4. -rtpdelay : configure RTP packets as normal delay or low delay

5. -rtcpdelay : configure RTCP packets as normal delay or low delay

6. -rtpthruput : configure RTP packets as normal throughput or high throughput

7. -rtcpthruput : configure RTCP packets as normal throughput or high throughput

8. -rtpreliab : configure RTP packets as normal reliability or high reliability

9. -rtcpreliab : configure RTCP packets as normal reliability or high reliability

Note:

1. This command won't be functional until network environment can be capable

LAN Phone Ver. 114/504(Normal and PPPoE)

Document Ver. 1.8b

Table of Contents

Lan phone 101