Table of Contents
Advertisement
LAN Phone 101 User Manual Guide
16. –range: assign dynamically allocated port range(1500-65535)
17. –respto: set max waiting time for first response to a new call. After dial phone No. without
getting response in max waiting time, user will hear busy tone.(1-200 seconds)
18. –connto: set max waiting time for call establishment after receiving first response of a new
call (1-20000 seconds).
Note: 1.Items from 9-16 are for advanced user only.
2.In Peer-to-Peer mode, h323 –print will only display e164, alias, mode ,
RTP port, and allocated port range.
3.In P2P mode, please dial "#" after press IP address (ex.10.1.1.1 please dial
10*1*1*1#) or e.164 of Phone book (Please refer to chapter 3.9 Pbook
command).
13. [voice] command
The voice command is associated with the voice codec setting information.
1.-print: display voice codec information and configuration.
There are five voice codecs included in LAN Phone 101:G.723.1, G.711u, G.711A, G.729a,
G.729.
Copyright (c) 2002 WellTech Computer Corporation
28
LAN Phone Ver. 113/503(Normal and PPPoE)
Document Ver. 1.8
Advertisement
Table of Contents
