Table of Contents
Advertisement
Height adjustable legs:
1. Legs are packed in the top box.
2. Legs should be installed with the appliance being near the location of final installation, they are not secure
for long transport. After unpacking the range, raise it about a foot to insert the legs in their bases assembled
on the lower part of the cooker and lower the range gently to keep any undue strain from legs and mounting
hardware. It is recommended to use a pallet or lift jack instead of tilting the unit.
BACKGUARD INSTALLATION INSTRUCTION
It's always compulsory to installa the riser even for an island installation
1)
Remove n°2 screws fixing worktop as shown in fig.1
2)
Place front part of the backguard and attach it from bottom side with the two removed screws (point 2) as shown in
fig .2
3)
Fix the front part of the backguard with the screws supplied with the backguard kit (fig.3)
4)
Assemble back part with front part of the backguard and fix them with a screws supplied with the backguard kit
(fig.4)
1
3
5
2
4
Hide quick links:
Advertisement
Table of Contents
