Use Your Phone; Power On The Handset; Make An External Call; Preparatory Dialing - iDect Conference Z10 User Manual

4

USE YOUR PHONE

Note: If you have a Z10/Z10i Conference unit the operations are the same as
a Handset, except that it has no earpiece mode, only a speakerphone mode.

4.1 Power on the Handset

If your handset is turned off press and hold <TALK OFF> to turn on the handset.
You can press and hold <TALK OFF> again to turn off the handset.

4.2 Make an External Call

4.2.1

Preparatory dialing

Enter the phone number.
If you enter a wrong number, you can press <Clear> to delete the last digit, or press and hold
<Clear> to delete all the number.
Press <TALK ON> or <SPEAKERPHONE> to dial the number you have on the display.
4.2.2

Direct dialing

Press <TALK ON> or <SPEAKERPHONE> to take the line, wait to hear dial tone and then enter
the phone number.
Note: you will not be able to press <Clear> to correct any dialling mistakes.
4.2.3

Call from the phonebook

Press <Right Soft key> to access the phonebook and press <UP/DOWN> to select the desired
phonebook entry (if there are entries stored in the phonebook). Press <TALK ON> or
<SPEAKERPHONE> to dial out to the selected phonebook entry.
4.2.4

Call from the call list

Press <RIGHT> to access the call list and press <UP/DOWN> to select the desired call list entry
(if there are entries in the call list). Press <TALK ON> or <SPEAKERPHONE> to dial out to
the selected call list entry.
4.2.5

Call from the redial list

Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired redial
number (if there are numbers in the redial list). Press <TALK ON> or
dial out to the selected redial number.
4.2.6

Call timer

Your handset automatically times the duration of every call. It is shown in hours, minutes and
seconds format (HH:MM:SS, on the display during a call.)

4.3 Answer a Call

If the handset is not on the charging cradle, or if it is on the cradle but Auto Answer (see 8.1.11)
is set Off:
When the phone rings, press <TALK ON> / <SPEAKERPHONE> / <Accept> to answer a call.
If the handset is on the charging cradle or the base station and Auto Answer (see 8.1.11) is set
to On When the phone rings, pick up the handset to answer a call automatically, without having
to press a button.

4.4 End a Call

During a call press <TALK OFF> to end the call.
OR
Put the handset on the charging cradle or the base station or charger pod to end the call.

4.5 Adjust Earpiece and Handsfree Volume

5 volume levels (Level 1 to Level 5) are provided for each of earpiece and
handsfree volume.
<SPEAKERPHONE> to
1 1