Set The Answer Delay; Set The Recording Time Of Incoming Message; Activate Remote Access - iDect Conference Z10 User Manual

9.5.5

Set the Answer Delay

You can set the number of rings before the answering machine answers and starts playing your
OGM. You can set the answering machine to answer after two to nine rings or Time Saver.
Note: If you set Time Saver the telephone will be answered after 2 rings if you have new
messages, or after 5 rings if you do not. If you are away from home and want to check if
you don't get an answer after 3 rings, you know you have no new messages, so you can
save on call charges by hanging up before the answering machine answers.
1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine.
2. Press <Select> and <UP/DOWN> to scroll to TAM Settings.
3. Press <Select> and <UP/DOWN> to scroll to Answer Delay (Available options: 2 to
9 Rings or Time Saver).
4. Press <Select> and <UP/DOWN> to scroll to your desired answer delay.
5. Press <Select> to confirm.
9.5.6

Set the Recording Time of Incoming Message

You can set the maximum length of the recording time for each incoming message.
1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine.
2. Press <Select> and <UP/DOWN> to scroll to TAM Settings.
3. Press <Select> and <UP/DOWN> to scroll to Recording Time (Available options: 60 Sec,
120 Sec, 180 Sec, or Unlimited).
4. Press <Select> and <UP/DOWN> to scroll to your desired recording time.
5. Press <Select> to confirm.
9.5.7

Activate Remote Access

Your phone lets you check your messages, or otherwise operate your answering machine, by
calling the answering machine when you are away from home by entering a 4-digit remote
access PIN on a tone-dialing phone. The default setting for the 4-digit remote access PIN is
0000.
9.5.7.1 Change the 4-Digit Remote Access PIN
1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine.
2. Press <Select> and <UP/DOWN> to scroll to TAM Settings.
3. Press <OK> and <UP/DOWN> to scroll to Chg Remote PIN.
4. Press <Select> and enter the Old remote access PIN (Default Remote Access PIN is 0000).
Note: If the Old remote access PIN is entered incorrectly, "Old PIN Invalid" is displayed and it
will return to the TAM Settings menu.
5. Press <OK> and enter your new remote access PIN.
6. Press <OK> and enter your new remote access PIN again.
7. Press <OK> to confirm.
Note: If the new remote access PIN entered in Step 6 does not match with the new remote
access PIN entered in Step 5, "New PIN Invalid" is displayed, and you have to enter your new
remote access PIN again in Step 5.
9.5.7.2 Activate or Deactivate the Remote Access
1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine.
2. Press <Select> and <UP/DOWN> to scroll to TAM Settings.
3. Press <Select> and <UP/DOWN> to scroll to Remote Access.
4. Press <Select> and <UP/DOWN> to scroll to On or Off to turn on or off the remote access
respectively.
5. Press <Select> to confirm.
27