Install And Charge The Batteries - iDect Conference Z10 User Manual

2.2

Install and Charge the Batteries

Handset:
1) Place the two supplied batteries as
shown, and with the correct polarity.
2) Slide the battery compartment cover
back on, as shown.
3) Put the handset on the base and
charge the battery for 15 hours before
using the handset for the first time.
The handset will give a beep when it is
properly placed on the base or charger.
Use only the NiMH rechargeable batteries provided.
Conference Unit :
1) Place the two supplied batteries
as shown, and with the correct polarity.
2) Replace the battery compartment
cover as shown.
Put the conference unit on the
3)
charger pod and charge the
battery for 15 hours before using the
conference unit for the first time.
The conference unit will give a
beep when it is properly placed
on the charger pod.
3