Settings; Handset Settings; Set The Audio Volume; Set The Internal Ringer Melody - iDect Conference Z10 User Manual

8

SETTINGS

Your phone comes with a selection of settings that you can change to personalise your phone
operation.

Handset Settings

8.1
8.1.1

Set the audio volume

In idle mode:
1. Press <MENU> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Audio Setup.
3. Press <Select> and <UP/DOWN> to scroll to Speaker Volume or Ear Volume
(for handset unit only).
4. Press <Select> and <UP/DOWN> or <LEFT/RIGHT> to select the volume level from
level 1 to level 5.
5. Press <OK> to confirm your chosen Speaker or Earpiece volume.
8.1.2

Set the internal ringer melody

In idle mode:
1. Press <MENU> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup.
3. Press <Select> and <UP/DOWN> to scroll to Internal Ring.
4. Press <Select> and <UP/DOWN> to scroll to your desired internal ringer melody (10 ringer
melodies and 5 standard tones are provided).
Note: The respective ringer melody will be played while browsing the melody list.
5. Press <Select> to confirm your internal (intercom) ringer melody.
8.1.3

Set the external ringer melody

In idle mode:
1. Press <MENU> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup.
3. Press <Select> and <UP/DOWN> to scroll to External Ring.
4. Press <Select> and <UP/DOWN> to scroll to your desired external ringer melody (10 ringer
melodies and 5 standard tones are provided).
Note: The respective ringer melody will be played while browsing the melody list.
5. Press <Select> to confirm your external call ringer melody.
8.1.4

Adjust the Ringer Volume

In idle mode:
1. Press <MENU> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup.
3. Press <Select> and <UP/DOWN> to scroll to Ring Volume.
4. Press <Select> and <UP/DOWN> or <LEFT/RIGHT> to select your desired ringer volume
level from Level 1 to Level 5 or Ringer Off.
Note: The respective ringer volume will be played during your selection.
If Volume Off is selected, the <Ringer Off> icon will be displayed in idle mode.
5. Press <OK> to confirm your ringer volume selection.
8.1.5

Set the alert tones

A single beep is emitted when you press a key. You can turn this key tone on or off. You can
also turn on the alert tones when low battery and out of range are detected.
1. Press <MENU> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Tone Setup.
3. Press <Select> and <UP/DOWN> to scroll to Key Tone / Battery Low / Out of Range.
4. Press <Select> and <UP/DOWN> to scroll to On or Off.
5. Press <Select> to confirm your alert tone setting.
19