Base Station Overview - iDect Conference Z10 User Manual

3.3 Base Station Overview

1.
PAGE
Press to page handsets.
Press and hold to put in registration mode.
2.
CHARGING CRADLE
3.
CHARGING INDICATOR LED
Steadily on while the handset is charging
4.
IN USE INDICATOR LED
Steadily ON: During a call
Flashing: During ringing or new TAM message is received.
(FOR Z10i CONFERENCE ONLY)
3.4 Handset / Conference Unit\ LCD Display
Following icons will be displayed according
to the current status of the phone operation.
Icons Description
Steady when the handset is in range of the base. More bars will
show when the signal strength is strong.
Flashes when the handset is searching for, or is out of range of the base.
Indicates that the alarm is set.
Flashes when the alarm time is reached.
Indicates an intercom is in progress.
Indicates an external a call is in progress.
Flashes when ringing.
Indicates the speakerphone is being used.
Indicates that the handset ringer is switched off.
Indicates the answering machine is turned on.
Flashes when the answering machine memory is full.
(For Z10i Conference only)
You have a new Voice Mail message. (This is a caller id service and is
not usually available from UK network providers.)
Indicates that the keypad is locked.
Indicates when the battery is fully charged.
Indicates when the battery is 1/3 charged.
Indicates when the battery is 2/3 charged.
Flashes when low battery is detected to indicate that it needs charging.
The bars on the battery level symbol continuously change as the batteries
are being charged.
6
2
4
1
3