Install Your Phone; Connect The Base Station - iDect Conference Z10 User Manual

2

INSTALL YOUR PHONE

2.1

Connect the Base Station

2.1 Connect the Base Station
1) Plug the power supply & line cord
into the base station.
2) Plug the mains adapter into a 230Vac mains
telephone socket,and the telephone line plug
into your telephone socket.
3) Always use the cables provided in the box.
Warning: Only use the mains power adapter provided.
Other power supplies may cause a hazard.
Warning: Install the base unit in a position where the
mains adapter plug will reach an easily accessible
mains socket. Never try to lengthen the mains power cable.
Note: The base unit needs mains power for normal operation,
not just for charging the handset batteries.
If you have a Broadband line
If you connect your telephone to
a line with a broadband
connection, you will need to
insert a micro-filter between
the telephone and the telephone
line; otherwise you may get interference
between the telephone and the broadband, which could cause problems.
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
2