7
CLOCK & ALARM
You can set date and time in different format as well as an alarm time.
7.1
Date & Time
7.1.1
Change date format
In idle mode:
1. Press <Menu> and <UP/DOWN> to scroll to Clock/Alarm.
2. Press <Select> and <UP/DOWN> to scroll to Date & Time.
3. Press <Select> and <UP/DOWN> to scroll to Date Format.
4. Press <Select> and <UP/DOWN> to scroll to your desired date format from
DD-MM-YYYY or MM-DD-YYYY
5. Press <Select> to confirm.
7.1.2
Change time format
In idle mode:
1. Follow steps 1 to 2 in Section
7.1.1
.
2. Press <Select> and <UP/DOWN> to scroll to Time Format.
3. Press <Select> and <UP/DOWN> to scroll to your desired time format from
12 Hours or 24 Hours.
4. Press <Select> to confirm.
7.1.3
Set the date
In idle mode:
1. Follow steps 1 to 2 in Section
7.1.1
.
2. Press <Select> and <UP/DOWN> to scroll to Set Date.
3. Press <Select> and enter the date according to the date format you set in Section
4. Press <OK> to confirm and save the new date.
Note: If an invalid date is detected, an error tone will sound, the entry will not be saved and you
can try again to enter a valid date.
7.1.4
Set the time
In idle mode:
1. Follow steps 1 to 2 in Section
7.1.1
.
2. Press <Select> and <UP/DOWN> to scroll to Set Time.
3. Press <Select> and enter the time according to the time format you set in Section
Note: If an invalid time is detected, an error tone will be emitted and the cursor will stay at the
incorrect input.
4. If entering the time in 12 hour format, when the cursor is at the AM/PM field,
press <UP/DOWN> to switch between AM or PM.
In 12 hour format the time can be between 01:00 and 12:59.
In 24 hour format the time can be between 00:00 and 23:59.
5. Press <OK> to confirm.
7.2
Alarm
You can use the handset as an alarm clock. When an alarm is set, the <ALARM Icon>
is shown on the handset display. When the alarm time is reached, the <ALARM icon> and
"Alarm On" flash on display, and the alarm melody is played for 45 seconds or until any handset
key is pressed.If the snooze function is activated, the alarm will repeat every 2 minutes, unless
<Off> or <TALK OFF> are pressed while the alarm is sounding.
7.1.1.
7.1.2
.
17
Need help?
Do you have a question about the Conference Z10 and is the answer not in the manual?
Questions and answers