①
Apply the rear brake by squeezing the rear
brake lever towards the grip.
②
This knob is used to set the parking brake,
which is used to prevent the 『ATV』from
moving when it is parked, being started, or at
idle. Set the parking brake by squeezing the
rear brake lever and pushing this knob to
lock the lever in the squeezed position.
③
Push in the electric starter switch to rotate
the starting motor.
④
◉ "
"
◉ "
"
①
Apply the front brake by squeezing the front
brake lever towards the grip.
②
Engine speed is controlled by the position of the
throttle lever. Push it forward to increase engine
speed. Release it to decrease engine speed.
This lever is operated by the rider s thumb.
③
10
The ignition circuit is off.
The engine cannot start or run.
The ignition circuit is on
and the engine can run.