Rear Brake; Brake Lining Wear Limit; Brake Adjustment - HYOSUNG TE 50 B Owner's Manual

●
This vehicle is equipped with the brake lining
wear limit indicators on the front brakes.
To check wear of the brake lining, perform the
following :
① Check if the brake system is properly adjust-
ed.
② While fully applying the brake, check to see
that the extension line of the index mark is
within the range on the brake panel.
③ If the extension line is beyond the range,
have the brake shoe assembly replaced by
your Hyosung dealer to ensure safe opera-
tion.
◉
●
1. Set the parking brake by squeezing the rear
brake lever and pressing the lock knob ① .
2. Try to move the vehicle backward and for-
ward to see if the rear wheels are securely
locked. If the rear wheels can turn, adjust the
rear brake to lock the wheels securely by
releasing the parking brake and turning the
adjuster ② in. Repeat this procedure until the
parking brake is properly adjusted.
3. Measure the amount of free play needed to lock
the rear brake lever, as shown in the above illus-
tration. Adjust the rear brake, if necessary, so
that amount of free play ③ is about 5~15 mm
(0.197~0.591 in) .
4. After any adjustment of the rear brake, check
again to make sure the rear wheels can not
turn when the parking brake lock knob is
engaged.
33
5~15 mm
(0.197~0.591 in)
②