Engine Oil Level; Transmission Oil Capacity - HYOSUNG TE 50 B Owner's Manual

To change the oil :
1. Place the vehicle on level ground.
2. Remove the oil filler cap ① .
3. Remove the oil drain plug ③ from the bottom
of the engine and drain the oil completely.
4. Reinstall the drain plug③.
5. Remove the clutch cover.
6. Remove the level screw ② and pour fresh oil
of the specified type through the filler hole
until the oil flows out from the oil level hole.

TRANSMISSION OIL CAPACITY

Replace
Overhaul
7. Refit the oil filler cap ① and oil level screw ②.
�
�
80 ㎖
90 ㎖
31
The engine oil tank is located under the seat.
Check the oil level each time before starting the
engine. If the oil level is low, fill up the tank with
the specified oil. The oil tank holds 1.0ℓ
『 『 』 』