Exiting Screen Saver Mode - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

64 HP IP Console Switch User Guide

Exiting Screen Saver Mode

To exit the Screen Saver mode, press any key or move the mouse. The Main
dialog box ("Accessing the Main Dialog Box" on page 45) is displayed.
Deactivating the Screen Saver
1. From the Security dialog box ("Accessing the Security Dialog Box" on page
2. Click OK to save settings.
To immediately activate the screen saver, press the Print Scrn key, and then
press the Pause key. This command only works when the user is connected to a
server.
Activating Screen Saver Mode without Password Protection
1. If your HP IP Console Switch does not require a password to gain access to
2. Select Enable Screen Saver.
3. Enter the number of minutes for Inactivity Time (1 to 99) to delay activation
4. Select Energy if your monitor is Energy Star® compliant. Otherwise,
5. (Optional) Click Test to activate the screen saver test, which lasts 10
6. Click OK to save settings.
62), deselect Enable Screen Saver.
the Security dialog box ("Accessing the Security Dialog Box" on page 62),
proceed to step 2.
-or-
If your HP IP Console Switch is password protected, refer to Deactivating
the Screen Saver (on page 64), then go to step 2.
of the screen saver.
select Screen.
seconds, then returns you to the Security dialog box.
CAUTION: Monitor damage can result from the use of energy
mode with monitors not compliant with Energy Star®.
NOTE: No server is selected after the activation of the screen saver
mode disconnects the user from a server. The status flag displays Free.