Setting Up A Scan Pattern; Accessing The Scan Dialog Box - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Activating the Broadcast Dialog Box
To activate or deactivate broadcasting, from the Commands dialog box
("Accessing the Commands Dialog Box" on page 75), select or deselect
Broadcast Enable.

Setting Up a Scan Pattern

In Scan mode ("Activating Scan Mode" on page 61), the HP IP Console Switch
automatically scans port to port (server to server).You can select up to 16 servers
from a list of all servers attached to the HP IP Console Switch. You can display
the list by either server name or EID number by clicking the appropriate button.
Selecting the checkbox beside each server to be added to the scan list creates the
scan list. The creation of a scan list does not start Scan mode. You must enable
Scan mode through the Scan Enable checkbox on the Commands dialog box
("Accessing the Commands Dialog Box" on page 75).

Accessing the Scan Dialog Box

From the Main dialog box ("Accessing the Main Dialog Box" on page 45), click
Setup>Scan. The Scan dialog box is displayed.
Local Port Operation 59