When The Osd Is Distorted Or Not Readable; When The Osd Is Inaccessible; When Riloe And Ilo Are Not Working Correctly With The Hp Ip Console Switch; When The Run Diagnostics Test Fails - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

106 HP IP Console Switch User Guide

When the OSD is Distorted or Not Readable

Be sure that the monitor to which the target server is set supports the refresh rate.

When the OSD is Inaccessible

Press the Ctrl key twice.
When RILOE and iLO are not Working Correctly with
the HP IP Console Switch
The HP IP Console Switch firmware must be version 3.0.0 or later.

When the Run Diagnostics Test Fails

1. Upgrade the console switch firmware ("Upgrading the HP IP Console Switch
2. Upgrade the Interface Adapter firmware ("Upgrading the Interface Adapter

When the Screen Saver Does Not Turn On

Be sure to click OK to confirm the screen saver selection. Click X or press the
Esc key to cancel the command.
When the Servers Are Still Listed Although They
Have Been Disconnected
Perform the Run Diagnostics ("Running System Diagnostics" on page 77)
function, from the Diagnostics dialog box, and click Clear.
IMPORTANT: While upgrading the firmware, do not power off the HP
IP Console Switch or attempt any operations.
Firmware" on page 97).
Firmware Simultaneously" on page 88).