How Do I Use The Run Diagnostics Feature; Is The Console Switch Operational; What Are The Minimum And Maximum Cable Lengths; What Kind Of Cat5 Cables Are Supported - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

114 HP IP Console Switch User Guide
2. Click OK to save settings.
To immediately activate the screen saver, press the Print Scrn key, and then
press the Pause key. This command only works when the user is connected to a
server.

How Do I Use the Run Diagnostics Feature?

Refer to "Running System Diagnostics (on page 77)."

Is the Console Switch Operational?

1. Ask the customer to connect the KVM cables to the appropriate connectors
2. Power on the HP IP Console Switch.
3. After the activity indicator light is on, which means the console switch is

What are the Minimum and Maximum Cable Lengths?

Refer to "Connection Length Table (on page 107)."

What Kind of CAT5 Cables Are Supported?

Only UTP CAT5, CAT6, and CAT7 cables are supported.
("Components" on page 7) on the rear panel of the console switch.
Does the activity indicator light ("Components" on page 7) on the rear panel
of the console switch light up?
If the activity indicator light is on, the console switch is operational.
-or-
If the activity indicator light is not on, ask the customer to be sure the power
source is valid, the power button is on, and the cables are connected properly.
operational, ask the customer to press the Prnt Scrn key on the keyboard
attached to the monitor that is connected to the console switch (local port).
The Main menu appears and if no servers are connected, the screen is blank.