5. (Optional) If you have any suspect Interface Adapters, you can click
Resetting the PS/2 Device
If your PS/2 device locks up, you can re-establish operation of these peripherals
by issuing a device reset. The device reset sends a key sequence to the server,
which causes the device settings to be sent to the console switch. With
communication re-established, functionality is restored to the user.
1. From the Main dialog box, click Commands. The Commands dialog box
Display. The Suspect Interface Adapter dialog box appears.
NOTE: The reset PS/2 device function is only for cascaded console
switches.
NOTE: This function is for Windows®-based computers only. Resetting
the PS/2 devices on a computer running any other operating system
might require that you reboot that computer.
appears.
Local Port Operation
81