Controlling The Status Flag - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Setting a Screen Delay Time
Setting a time to delay the display of the OSD enables you to complete a soft
switch ("Soft Switching" on page 50) without displaying the OSD. It is strongly
recommended to leave the number of seconds (0-9) the OSD is delayed to the
default (0).
1. From the Main dialog box ("Accessing the Main Dialog Box" on page 45),
2. Click OK to save settings.

Controlling the Status Flag

The status flag is displayed on the desktop and shows the Name or EID number
of the selected server or the status of a particular port. Use the Flag dialog box
("Accessing the Flag Dialog Box" on page 56) to change the flag display by
server name or EID number or to change the flag color, opacity, display time,
and location on the desktop.
Flag
enter the number of seconds (0–9) the OSD is delayed after pressing the
Print Scrn key. Entering 0 instantly displays the OSD with no delay.
-or-
Click X to exit, or press the Esc key to exit without saving settings.
Description
Flag type by name
Flag type by EID number
Flag indicating that the user has been disconnected from all
systems
Flag indicating that the broadcast is activated
Control used to set flag position
Local Port Operation 55