Exiting Screen Saver Mode; Activating Screen Saver Mode Without Password Protection; Deactivating The Screen Saver - HP 339674-001 User Manual

66 HP KVM Server Console Switch User Guide
5. Click OK if you want to eliminate the password.

Exiting Screen Saver Mode

To exit the Screen Saver mode, press any key or move the mouse. The Main
dialog box ("Accessing the Main Dialog Box" on page 41) is displayed.

Activating Screen Saver Mode without Password Protection

1. If your HP KVM Server Console Switch does not require a password to gain
2. Select Enable Screen Saver.
3. Enter the number of minutes for Inactivity Time (1 to 99) to delay activation
4. Select Energy if your monitor is Energy Star® compliant. Otherwise,
5. (Optional) Click Test to activate the screen saver test, which lasts 10
6. Click OK to save settings.

Deactivating the Screen Saver

1. From the Security dialog box ("Accessing the Security Dialog Box" on page
2. Click OK to save settings.
access to the Security dialog box ("Accessing the Security Dialog Box" on
page 64), proceed to step 2.
-or-
If your HP KVM Server Console Switch is password protected, see the
previous procedure, then go to step 2.
of the screen saver.
select Screen.
seconds, then returns you to the Security dialog box.
CAUTION: Monitor damage can result from the use of energy
mode with monitors not compliant with Energy Star®.
NOTE: No server is selected after the activation of the screen saver
mode disconnects the user from a server. The status flag displays Free.
64), clear Enable Screen Saver.