When The Console Switch Does Not Have The Correct Firmware; When The Console Switch Is Not Working Properly; When The Console Switch Hangs After Being Rebooted - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

2. Be sure that the cascade configurations ("Cascading Console Switches" on
3. Be sure that the cascaded console switches are powered on.
4. Be sure that the cascaded console switches and all attached Interface
When the Console Switch Does Not Have the Correct
Firmware
1. Be sure that you have the latest console switch firmware version
2. Upgrade the console switch firmware ("Upgrading the HP IP Console Switch

When the Console Switch is Not Working Properly

1. Determine whether the console switch is operational ("Is the Console Switch
2. Determine if all the cable connections are correct.
When the Console Switch Hangs After Being
Rebooted
1. Reboot the HP IP Console Switch again (turn the power off and back on
2. Perform the following powering-on sequence.
page 37) are correct.
IMPORTANT: While upgrading the firmware, do not power off the HP
IP Console Switch or attempt any operations.
Adapters ("Upgrading the Interface Adapter Firmware Simultaneously" on
page 88) have upgraded firmware.
IMPORTANT: While upgrading the firmware, do not power off the HP
IP Console Switch or attempt any operations.
("Displaying Version Information" on page 82) and Interface Adapter
firmware version ("Displaying Version Information" on page 82).
Firmware" on page 97), Interface Adapter firmware ("Upgrading the
Interface Adapter Firmware Simultaneously" on page 88), and cascaded
console switch firmware if you do not have the latest versions installed.
Operational?" on page 114).
again).
Troubleshooting 103