Resetting The Ps/2 Interface Adapter - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

86 HP IP Console Switch User Guide
5. Click X to exit.

Resetting the PS/2 Interface Adapter

Occasionally, when cascading to a legacy console switch, a PS/2 Interface
Adapter can drop out of the cascade configuration. In the IA Version dialog box
of a PS/2 Interface Adapter, you can reset that Interface Adapter. By performing
a Reset IA, the Interface Adapter re-initializes back into the cascade
configuration and continues to function properly.
1. From the Main dialog box ("Accessing the Main Dialog Box" on page 45),
2. Click IA. The IA Version dialog box appears.
NOTE: The reset PS/2 device function is only for cascaded console
switches.
NOTE: This function is for Windows®-based computers only. Resetting
the PS/2 devices on a computer running any other operating system
might require that you reboot that computer.
click Commands>Display Versions. The Version dialog box appears.