Kyocera M410R User Manual page 84

Introduction
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto) | Using Flash | Adjusting Brightness | Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality |
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
4
Press the up u or down d button to
select [CONTRAST] and then press the
OK button E.
5
Press the up u or down d button to
select the desired mode and then press
the OK button E.
The contrast is set.
[C+1] [+]
(No icon) [STANDARD] : Standard contrast. (default)
[C-1] [-]
6
Press the MENU button K.
The icon for the selected contrast appears on the LCD monitor.
A Important
• In "S" mode, this setting is retained even when the camera is turned off.
• In "I" mode, the contrast reverts to the default setting when you turn the camera off.
Contents (Top page) Detailed Contents
Getting Ready Taking Pictures
: Give a strong contrast.
: Softens the contrast.
Index
Playback
GB-84
Nomenclature
Set Up
Adjusting Image
COLOR MODE COLOR
CHROMA STANDARD
SHARPNESS STANDARD
CONTRAST STANDARD
WB PRESET SET
SETTINGS(1/2)
COLOR MODE COLOR
CHROMA STANDARD
SHARPNESS +
CONTRAST STANDARD
-
WB PRESET
SETTINGS(1/2)
BACK
Menus and Settings Troubleshooting
+1