Adjusting Brightness; [M] Using Exposure Compensation - Kyocera M410R User Manual

Introduction
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto) | Using Flash |

Adjusting Brightness

Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
Adjusting Brightness

[M] Using Exposure Compensation

«Applicable modes: S / I / M»
Use exposure compensation to adjust the brightness of your images. This
function is especially useful for shots where you did not get the ideal
exposure because the brightness of subject and background were very
different. You can also use this feature when you deliberately want to shoot
under- or overexposed images.
This camera allows you to adjust the brightness up to plus or minus 2.0 EV
in 1/3 EV increments.
A Important
Remove the lens cap before turning the camera on.
1
Set the mode select dial to "S", "I" or "M" and turn the
camera on.
2
Press the exposure compensation button X.
The exposure compensation settings menu appears, along with the
compensation values and the image histogram.
3
Press the up u or down d button to
select the desired compensation setting.
Contents (Top page) Detailed Contents
Getting Ready Taking Pictures
| Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality | Adjusting Image
Darker
-2.0
Index
Playback
Brighter
+2.0
±0.0
(Default)
GB-57
Nomenclature
Set Up
+2.0
NEXT
Menus and Settings Troubleshooting