Switching The Digital Zoom On And Off - Kyocera M410R User Manual

Introduction
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer |
Telephoto) | Using Flash | Adjusting Brightness | Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality | Adjusting Image
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
2
When the image is fully zoomed in,
release the zoom button and then press
the zoom button T again.
The image is enlarged successively by 1.3x, 1.6x, 2.0x, 3.0x, 4.0x, 5.0x
and 6.0x (digital zoom).
While you are using the digital zoom, a dedicated zoom bar for the
digital zoom is displayed to the right of the optical zoom bar.
The magnification available using the digital zoom differs depending on
the number of pixels (image size) specified (
Image size
2272x1704
1600x1200
1280x960
640x480

Switching the Digital Zoom ON and OFF

You can use the procedure below to disable the digital zoom.
1
Set the mode select dial to "G" and
turn the camera on.
2
Press the up u or down d button to
select [DIGITAL ZOOM] and then press
the right button r.
Contents (Top page) Detailed Contents
Getting Ready Taking Pictures
Available digital zoom magnification
up to 4.0x
up to 5.0x
up to 6.0x
up to 6.0x
Index
Playback
p.74).
GB-49
Nomenclature
Set Up
Using Zoom (Wide-angle and
X1 . 3 X1 . 3 1 . 3
SET UP(1/3)
AF MODE SAF
BRIGHT CNTRL STANDARD
DATE 2004.01.01
DIGITAL ZOOM ON
FORMAT EXECUTE
POWER SAVE 3MIN.
BACK NEXT
Menus and Settings Troubleshooting