[Metering] Selecting The Area Used For Setting The Exposure - Kyocera M410R User Manual

Introduction
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto) | Using Flash | Adjusting Brightness
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
6
Press the MENU button K.
The aperture setting and shutter speed are displayed.
Press the left l or right r button to change the aperture or shutter
speed setting.
Out of support of AE mode
[PROGRAM]
[APER PRTY]
[SHTR PRTY]
A Important
• When [SHTR PRTY] is selected, long exposures cannot be set.
• This setting is retained when you turn the camera off.
[METERING] Selecting the Area Used for Setting the
Exposure
«Applicable modes: S / I»
In this mode, you can select the area that the camera uses to set the
exposure. The available settings are [EVALUATION], [CENTER] and [SPOT
AREA]. Use the setting that best suits your subject.
In [EVALUATION] mode, the screen is partitioned into zones and the
optimum exposure is determined based on measurements of the light in
each zone. Because this mode allows ordinary shots or even backlit shots
to be taken with little or no exposure compensation, it is recommended for
novices or for users who want to take pictures without having to worry
about the exposure settings.
In [CENTER] mode, the exposure is determined by giving particular weight
to measurements of the light from the subject that strikes the central part
of the screen. This mode makes it easy for the camera to set the exposure
even in shots where there is a strong light source close to the subject.
Contents (Top page) Detailed Contents
Getting Ready Taking Pictures
| Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality | Adjusting Image
The aperture setting and shutter speed are
displayed in red. Under this condition, you
cannot get the ideal exposure.
The aperture setting is displayed in red.
Under this condition, you cannot get the ideal
exposure.
The shutter speed is displayed in red. Under
this condition, you cannot get the ideal
exposure.
Index
Playback
GB-60
Nomenclature
Set Up
BACK NEXT
Menus and Settings Troubleshooting
F2 . 8
15