[G] Printing By Connecting The Camera Directly To A Printer (Pictbridge; Connecting The Camera To The Printer - Kyocera M410R User Manual

Introduction
Viewing Still Images | Viewing Movies | [o] Viewing Images Automatically as a Slideshow (slideshow) | [O] Viewing Multiple Images | [INFORMATION] Viewing Image Information | [J]/[I] Erasing Unwanted
Images | [U] Protecting Images from Accidental Erasing (PROTECT) | [p] Adding Voice Messages to Still Images (POSTRECORDING) | [V] Resizing and Trimming Images (RESIZE) | [W] Rotating an Image |
[T] Using DPOF to specify print settings |
[ ] Printing by Connecting the Camera Directly to a Printer (PictBridge)
G
«Applicable images: Still images only»
By connecting the camera to a printer that supports PictBridge, you can
print your images quickly and simply direct from the camera. You can also
use this method to print images with DPOF settings (
that support DPOF. Refer also to the Instruction Manual for your printer
when using this print method.
A Important
• Check that your printer supports PictBridge.
• Set the printer up for printing before starting this procedure. (Refer to the instruction

Connecting the camera to the printer

1
Turn the printer on.
2
Set the mode select dial to "P" and turn the camera on.
3
Press the MENU button K to display the menu icons.
4
Use the left l or right r button to select
[PictBridge] G and then press the OK
button E.
The printer connection screen appears.
Contents (Top page) Detailed Contents
Getting Ready

[G] Printing by Connecting the Camera Directly to a Printer (PictBridge)

manual for your printer.)
Index
Taking Pictures Playback
| Connecting to a Windows PC | Connecting to a Macintosh
GB-126
Nomenclature
Set Up
p.121) on printers
PictBridge
CONNECT TO PRINTER
RETURN
NEXT
Menus and Settings Troubleshooting