Kyocera M410R User Manual page 81

Introduction
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto) | Using Flash | Adjusting Brightness | Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality |
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
1
Set the mode select dial to "S" or "I" and turn the camera
on.
2
Press the MENU button K to display the menu icons.
3
Use the left l or right r button to select
[SETTINGS] K and then press the OK
button E.
4
Press the up u or down d button to
select [CHROMA] and then press the OK
button E.
5
Press the up u or down d button to
select the desired mode and then press
the OK button E.
The chroma is set.
[H+1] [+]
(No icon) [STANDARD] : Uses the standard color intensity. (Default)
[H-1] [-]
6
Press the MENU button K.
The icon for the selected intensity appears on the LCD monitor.
A Important
• In "S" mode, this setting is retained when you turn the camera off.
• In "I" mode, this setting reverts to its default value when you turn the camera off.
Contents (Top page) Detailed Contents
Getting Ready Taking Pictures
: Increases the color intensity.
: Decreases the color intensity.
Index
Playback
GB-81
Nomenclature
Set Up
Adjusting Image
SETTINGS
COLOR MODE COLOR
CHROMA STANDARD
SHARPNESS STANDARD
CONTRAST STANDARD
WB PRESET SET
SETTINGS(1/2)
COLOR MODE +
CHROMA STANDARD
SHARPNESS -
CONTRAST STANDARD
WB PRESET SET
SETTINGS(1/2)
BACK NEXT
Menus and Settings Troubleshooting
+1