[Chroma] Changing The Color Intensity - Kyocera M410R User Manual

Introduction
Taking Still Images | Using Continuous Shooting Mode | Shooting Movies | Selecting Scenes to Automatically Set the Focus and Flash | [k] Using Self-Timer | Using Zoom (Wide-angle and
Telephoto) | Using Flash | Adjusting Brightness | Setting Focus | Displaying Information on the LCD Monitor | Selecting the Number of Pixels (Image Size) and the Quality |
Colors and Other Settings | Switching Display Screen (Electronic Viewfinder and LCD Monitor) | Setting the exposure and focus during continuous shooting (Drive mode)
3
Use the left l or right r button to select
[SETTINGS] K and then press the OK
button E.
4
Press the up u or down d button to
select [COLOR MODE] and then press the
OK button E.
5
Press the up u or down d button to
select the desired mode and then press
the OK button E.
The color mode is set.
(No icon) [COLOR] : Takes the shot in color (default).
[B/W] [B/W]
[r] [SEPIA]
6
Press the MENU button K.
The icon for the selected color mode appears on the LCD monitor.
A Important
The specified mode is cancelled and the camera reverts to shooting in color (default
setting) when you turn the camera off.

[CHROMA] Changing the color intensity

«Applicable modes: S / I»
The [CHROMA] setting lets you take pictures in which the intensity of the
colors is increased (brighter colors) or decreased (paler colors).
A Important
Remove the lens cap before turning the camera on.
Contents (Top page) Detailed Contents
Getting Ready Taking Pictures
: Takes the shot in black and white.
: Takes the shot in sepia tones.
Index
Playback
GB-80
Nomenclature
Set Up
Adjusting Image
SETTINGS
COLOR MODE COLOR
CHROMA STANDARD
SHARPNESS STANDARD
CONTRAST STANDARD
WB PRESET SET
SETTINGS(1/2)
COLOR MODE COLOR
CHROMA B/W
SHARPNESS SEPIA
CONTRAST STANDARD
WB PRESET SET
SETTINGS(1/2)
BACK NEXT
Menus and Settings Troubleshooting