[Metering] Selecting The Area Used For Setting The Exposure; On The Lcd Monitor - Kyocera FineCam SL300R Instruction Manual

5
Press or
U D
the desired ISO setting and then press the
OK button
E
[No icon] AUTO: The camera sets the ISO sensitivity to suit
[ISO100] 100:
[ISO200] 200:
[ISO400] 400:
[ISO800] 800:
6
Press the MENU button K to clear the menu.
7
The selected setting ([ISO200], etc.) appears

on the LCD monitor.

• Because this setting is retained even when the camera is switched off, you need to restore
the original setting or otherwise modify the setting to suit the scene or subject being shot.
[METERING]
This setting allows you to select the area that the camera uses when setting the exposure.
The available settings are [EVALUATION], [CENTER] and [SPOT AREA]. Use the setting
that best suits your subject.
1
Switch the camera on and press
button until the "
LED.
2
Press the MENU button K to display the menu icons.
3
Use or
L R
SET DETAILS [
button .
E
on the 4-way button to select
.
the ambient conditions. (default)
Fixed at ISO 100
Fixed at ISO 200
Fixed at ISO 400
Fixed at ISO 800
Selecting the Area Used for Setting the Exposure
" or "
C N
on the 4-way button to select
] and then press the OK
or
O Q
" icon lights on the mode select
FOCUSING AUTO
LONG EXP. 100
ISO 200
ETERING 400
DIGITAL ZOO 800
SETTINGS(2/2)
Applicable mode: C/N
on the mode
ET DETAIL
4-23
4