[Ae Mode] Selecting The Exposure Setting Method - Kyocera Finecam SL400R Instruction Manual

7
[ ] appears on the LCD monitor.
• Because this setting is retained even when the camera is switched off, you need to restore
the original setting or otherwise modify the setting to suit the scene or subject being shot.
• Specify this setting for "
Movie mode. This setting is used for both "
[AE MODE]
The available AE mode settings are [PROGRAM], in which the camera automatically sets
aperture and shutter speed, and [F2.8] or [F7.5], in which the aperture is fixed and the
camera sets the optimum shutter speed. The higher the aperture, the greater the area
centered on the subject that is sharply focused (depth of field).
• If the subject is too bright and is overexposed when F2.8 is set, the camera automatically
shifts to the F7.5 setting.
• AE mode cannot be set in the "
1
Switch the camera on and press
button until the "
LED.
2
Press the MENU button K to display the menu icons.
3
Use or
L R
SETTINGS [
button .
E
4
Press or
U
[AE MODE] and then press
" camera mode, "
C
Selecting the Exposure Setting Method
", "
" or "
C N
on the 4-way button to select
] and then press the OK
on the 4-way button to select
D
" Continuous Shooting mode and "
N
" mode and "
C N
", " ", or " " scene mode.
or
O Q
" icon lights on the mode select
.
R
M
" mode.
Applicable mode: C/N
on the mode
ETTING
OLOR MODE OLOR
HROMA STANDARD
SHARPNESS STANDARD
WB PRESET SET
AE MODE PROGRAM
SETTINGS(1/2)
"
4
4-17