Operator Information Panel - IBM 8686 - Eserver xSeries 360 Hardware Maintenance Manual

The following illustration shows the indicators on the rear of the server.
Ethernet link LEDs
Ethernet Link LEDs: These LEDs (one for the Remote Supervisor Adapter, one for
the network) indicate that the related Ethernet link is operational.
Ethernet TX/RX LEDs: These LEDs (one for the Remote Supervisor Adapter, one
for the network) indicate that activity is taking place on the related network.
Remote Supervisor Adapter Ethernet port: This port enables you to manage the
server from a remote location.
Remote Supervisor Adapter fault LED: This LED indicates that the Remote
Supervisor Adapter has failed.
Remote Supervisor Adapter power LED: This LED indicates that power is being
supplied to the Remote Supervisor Adapter.
Ethernet port: This port enables you to connect the server to a network.

Operator information panel

The following illustration shows the controls, indicators, and USB port on the
operator information panel (also known as the front LED panel).
USB port: This port enables you to attach a USB device to the front of the server.
Ethernet TX/RX LEDs
USB port
SCSI bus activity LED
Information LED
Fault LED
Reset button
Power-control button
Power LED
Remote Supervisor
Adapter Ethernet port
Remote Supervisor
Adapter fault LED
(amber)
Remote Supervisor
Adapter power LED
(green)
Ethernet port
Features overview
9