Cabling The Server - IBM 8686 - Eserver xSeries 360 Hardware Maintenance Manual

Cabling the server

The following illustration shows the cable routing for a typical server configuration.
Detailed cabling instructions, including the use of the cable management arm, are
given in the Rack Mounting Instructions that come with the server. See "Input/output
ports" on page 97 for a description of the ports on the server rear panel.
Notes:
1. Refer to the documentation that comes with the options for additional cabling
2. The cable management arm does not ship with the rack kit. It ships with the
instructions. It might be easier for you to route any cables before you install
certain options.
country kit.
Attention: This illustration is for demonstration purposes only; your hardware
might differ.
103
Installing components