Hardware Installations And Upgrades; Before You Begin; Tools And Supplies Needed; Installing And Removing Memory - Intel SR1475NH1 - Server Platform - 0 MB RAM User Manual

3
Hardware Installations and
Upgrades

Before You Begin

Before working with your server product, pay close attention to the
at the beginning of this manual.

Tools and Supplies Needed

•
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
•
Needle nosed pliers
•
Antistatic wrist strap and conductive foam pad (recommended)

Installing and Removing Memory

The silkscreen on the board for the DIMMs displays DIMM_2B, DIMM_1B, DIMM_2A,
DIMM_1A starting from the edge of the board. DIMM_1A is the socket closest to the
processor socket. See "Memory" for a discussion of the memory requirements and
options. See "Additional Information and Software" for a link to the list of tested DIMMs.
Note: The DIMMs being installed must be DDR2 DIMMs (see letter "A" in
DIMMs will not physically fit into a server board designed to support DDR2 DIMMs (see
letter "B" in
®
Intel Server Board SE7230NH1-E and Intel
Figure 3).

Figure 3. DDR vs. DDR2 DIMMs

®
Server Platform SR1475NH1-E User's Guide
"Safety Information"
Figure 3). DDR
13