Table of Contents
Advertisement
• Do not remove the covers. Removing the covers of the laser product could result in
exposure to hazardous laser radiation. There are no serviceable parts inside the device.
• Use of controls or adjustments or performance of procedures other than those specified
herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note
the following:
Laser radiation when open. Do not stare into the beam, do not view directly with
optical instruments, and avoid direct exposure to the beam.
xxCAUTION:
Hazardous energy is present when the blade is connected to the power source. Always replace
the blade cover before installing the blade.
Regulatory specifications and disclaimers
Safety compliance
USA:
Canada:
Europe:
International:
Australia/New
Zealand:
vi
UL 60950 - 3rd Edition/CSA 22.2. No. 60950
cUL certified - 3rd Edition/CSA 22.2. No. 60950- for Canada (product bears the single
cUL mark for U.S. and Canada)
Low Voltage Directive, 73/23/EEC
UL/CB to EN60950 3rd Edition
UL/CB to IEC 60950 3rd Edition
UL/CB - EN60 950 3rd Edition
UL/CB - EMKO-TSE (74-SEC) 207/94
CB Report to IEC 60950, 3rd Edition plus international deviations
SBXL52: Hardware Maintenance Manual and Troubleshooting Guide
Advertisement
Table of Contents
