Intel SBXL52 - Server Compute Blade Hardware Maintenance Manual page 91

NOTE
See "System" on page 104 to determine which components should be replaced by a field service
technician.
Error code/symptom
151
(Real time clock error)
161
(Real time clock battery error)
162
(Device configuration error)
NOTE
Be sure to load the default settings
and any additional desired
settings; then, save the
configuration.
163
(Real-time clock error)
164
(Memory configuration changed.)
165
(Service Processor failure)
184
(Power-on password damaged)
185
(Drive startup sequence information
corrupted)
189
(An attempt was made to access the
server with invalid passwords)
201
(Memory test error.) If the server does
not have the latest level of BIOS installed,
update the BIOS to the latest level and
run the diagnostic program again.
229
(Cache error)
262
(DRAM parity configuration error)
Symptom-to-FRU index
FRU/action
1. Run diagnostics.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
NOTE
If unable to enter Configuration/Setup Utility program, view
system event log in SBCE management module.
2. Battery.
3. Failing device.
4. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
•
System board
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
•
Run the Configuration/Setup Utility program, and enter the
administrator password.
1. DIMM
2. System board
1. Microprocessor
2. Optional microprocessor (if installed)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
77