Fuse Replacement - DAELIM ROADWIN FI - CATALOG Owner's Manual

FUSE REPLACEMENT

Turn off the main switch to see if the fuse
is severed. If the fuse is severed, exchange
the fuse into a fuse with same capacity.
Fuse is installed in fuse box around the
●
battery.
To change a fuse, first take off fuse
●
cover. Then, remove the disconnected
fuse, and insert the reserved fuse with
same capacity.
FUSE HOLDER
If the fuse immediately becomes
●
severed after being changed with the new
one, check another problem of the
electric system. Contact to Daelim
service center.
46
<DISASSEMBLY> <ASSEMBLY>
Charging, combi S/W,
Fuse A
regulator
Winker relay, meter
lighting, horn, headlight
Fuse B
(LO/HI), front/rear stop
switch, taillight, fuel meter
Ignition coil, Ecu,
Fuse C
O2 Sensor
Ecu, Fuel pump relay,
Fuse D
Light relay
Do not use screw driver or other metal
●
parts to remove the fuse, as short circuit
can be occurred to cause damage to
electric system.
Do not usea fuse having a larger
●
voltage, as the wire can become
overheated and damaged.
When replacing any of the electrical
●
parts (lights and gauges), be sure to
replace them with the recommended
parts. Using different parts can lead to
the fuses burning out or damage to the
battery.
When washing the vehicle, take special
●
care not to allow to be splashed in the
area of the fuses.